So my new rain barrel is finally installed. Yes, this is my contribution to save our planet. I initially thought I would have to connect the RAIN CATCHER 4000 to one of the main spouts to get enough water. However, as I realized after the first major storm, enough rain water gets collected just from the porch roof in one hour.
I used a patio stone and some gravel to build a somewhat level base. Then, I removed a section of the spout so that the bottom edge of the spout is about 2 inches above the screen. This will be just enough space to remove the screen.
I also anchored a short piece of pressure treated 1×6 with Tapcon screws to the brick. Then, I used some flexible copper strapping and 1 inch stainless screws to attach the barrel to the 1×6.
The Rain Catcher 4000 came with a clip for the hose but it kept coming undone so I fastened that with the copper strapping as well.
Finally, I weighed down the screen with a rock. The Rain Catcher 4000 probably looks strange in the front of the house but I plan to conceal it with a tall shrub.
Well, it was perfect timing. It is about to rain.
Tags: Add new tag, barrel, conservation, rain, water, york region
I have endless problems with the hose at the bottom detaching, and losing gallons of water in the process. Tightening the clamp doesn’t do it.
Can you recommend what to do?
There should be a metal clamp to hold the hose in place. Unfortunately, to tighten the clamp screw, it is best to flip the barrel upside down.